Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

A/DAT-IAT生物膜法处理高含盐废水

以含盐量为60 000mg/L(以NaCl计)的模拟工业废水为研究对象,利用A/DAT-IAT生物膜反应器,研究A/DAT-IAT工艺对投加悬浮填料后高含盐废水的处理,并以CODCr、NH4 -N、PO43--P等作为指标评价处理效果.试验结果表明,在总水力停留时间(HRT)为13 h、pH=7,5、25℃条件下,进水ρ(CODCr)、ρ(NH4 -N)和ρ(PO43--P)分别为907.4～1 210.0 mg/L、86.2～99.7 mg/L和3.6～5.1 mg/L.CODCr、NH4 -N和PO43--P的平均去除率分别为73.9%、38.6%和93.5%,平均出水SS为198 mg/L,其中CODCr和PO43--P的去除效果较好.研究表明,A/DAT-IAT生物膜法较其他活性污泥法有了较大的提高.     

北京市PM5.0可吸入颗粒物反演及其时空分布分析

分析城市可吸入颗粒物的空间特征及影响因素对于制定更为有效的可吸入颗粒物污染控制政策具有重要的现实意义.本研究在实际采样和遥感数据处理基础上,构造差值植被指数(DVI),通过建立TM影像与对应PM5.0颗粒物实测值之间的相关关系模型,对北京市2008~2010年3 a的PM5.0的分布进行了反演计算和精度分析;研究了NDBI和NDMI对PM5.0浓度的影响,进一步揭示了北京五环区域范围内可吸入颗粒物的时空分布特征.结果表明,采用DVI反演PM5.0分布的方法可行,反演精度在可接受范围内;整体上研究区2008年PM5.0颗粒物污染最轻,西南三环和四环以及东南三四环之间为颗粒物污染的高值区,西北五环附近颗粒物污染较轻;NDBI(归一化建筑指数)、NDMI(归一化水汽指数)与PM5.0可吸入颗粒物的分布分别呈现显著的负相关和正相关关系,且二者对PM5.0的影响相近.     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

东莞市大气亚微米粒子PM1及其中水溶性无机离子的污染特征

2011年8月—2012年7月期间,利用中流量(100 L·min-1)大气采样器对东莞市A和B两点(A:生活区,B:工业区)进行PM1、PM1~2.5、PM2.5~10采样,并定量分析颗粒物上F-、Cl-、NO-3、SO2-4、NH+4、Na+、K+、Ca2+、Mg2+等9种水溶性无机离子.分析结果显示,工业区B点的细粒子污染较生活区A点严重,B点PM1质量浓度年均值为48μg·m-3,其浓度是A点的1.2倍.A、B两点PM1对PM2.5和PM10的质量贡献率无明显差异,平均贡献率分别高达69%和45%.二次离子SO2-4、NO-3、NH+4及与燃烧行为有关的K+、Cl-等5种离子在细粒子PM1上富集,这5种离子对PM1质量的贡献率分别为18.82%~19.76%、4.98%~5.47%、3.98%~4.12%、2.03%~2.27%和3.39%~3.78%.而其他4种离子,Ca2+、Mg2+、F-和Na+积聚在粗粒子PM2.5~10上.PM10/PM2.5/PM1三种粒子中,PM1粒子酸性值AE/CE(阴离子当量浓度/阳离子当量浓度)比值和硫转化率SOR、氮转化率NOR值均是最高.     

固定源细颗粒物稀释测试法现场应用存在问题及影响因素分析研究

对基于大气环境的稀释测试法在现场应用中存在的主要问题进行了归纳总结,并对若干影响细颗粒物测试结果的重要因素进行了分析,诸如停留时间、稀释比、采样时间等因素,期望能够对该法测试系统的后续改进或重新设计提供实际问题导向,同时也能够对该领域现场工作的科研人员提供非常有用的经验。     

上海市降水过程中汞的浓度变化研究

为了研究降水过程中汞浓度变化规律,采集了上海市区2009年7月6日一次连续降水过程中的分时段12个雨水样品,利用冷原子荧光测汞仪测定了总汞、溶解态汞和颗粒态汞浓度.分析结果显示,降水过程各时段雨水样品的总汞浓度变化范围为0.26～0.53 μg·L-1之间,其中溶解态汞占总汞的比例为67.9％～96.8％;总汞浓度和颗粒态汞浓度的总体变化规律较一致,降水事件的前30分钟内浓度较高,之后逐渐降低,最终趋于稳定;溶解态汞浓度从降水事件开始由高到低逐渐变化,最终也趋于稳定.通过清除比计算云下冲刷过程对雨水中总汞浓度的贡献,发现云下冲刷的贡献大于40.9％.     

电吸附水处理技术(EST)对污水悬浮物去除效果研究

为了研究电吸附水处理技术(EST)对污水悬浮物的去除效果,本文采用电吸附水处理技术对生活污水中悬浮物进行处理分析,结果表明电吸附水处理系统对悬浮物的去除效果较好,去除率达到74.07%,而电吸附模块本身对悬浮物去除率仅为14.29%,氯离子、进水中悬浮物的浓度及进水中的硬度值均对悬浮物去除效率没有影响。因此,电吸附水处理技术可作为污水处理的一种新型有效方法。     

Trace elements in particulate matter of ambient air at petroleum filling stations

Size segregated suspended particulate matter (PM_2.5 and PM_10-2.5) in air at four major petroleum-filling stations in Ile-Ife, Nigeria, were monitored using double staged “Gent” stacked samplers to assess variations in mass loads and elemental concentrations of 25 elements. Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, Zr, Cs, Ta, W, and Pb were determined in both fractions by external ion beam proton-induced X-ray emission technique. Enrichment factors and pollution indices were calculated and results revealed that most elements were anthropogenic in both fractions with concentrations exceeding the World Health Organization guideline standards.     

表观遗传学机制与空气污染的健康效应

空气污染是一个全球性的问题,并且具有深远的环境影响。暴露于空气污染会对人体健康产生许多不同的影响,理解空气污染的健康效应又是一个复杂命题,既要考虑不同类型的污染物同时也要考虑相关疾病的复杂性。然而越来越多的研究表明,表观遗传学在空气污染相关疾病的发生、发展中发挥着重要的作用。空气污染物可引起DNA甲基化、组蛋白修饰和miRNA表达等表观遗传学改变,这种改变往往发生在疾病产生的早期,因此相关研究不仅可以了解疾病的发病机制,而且还为疾病早期诊断和预防筛选可能的标志物。本文综述了表观遗传学的几种修饰方式和空气污染物造成不良健康损伤机制的一些研究进展。